Step 7.
Once the ETS project has been imported, double-click it from ETS interface to open it and enter the
password again to open the project.
Figure 102.
Opening the ETS project
4.2.4
ETS project overview
ETS project shows the KNX system topology.
For evaluation purposes KNX topology is simple (limited to 5 devices maximum).
Expanding RF line, you can find two RF objects: KNX-RF push button application and KNX-RF LED actuator
application.
Figure 103.
KNX system topology
4.2.5
Addressing KNX devices
For each KNX device, the ETS project gives an addressing table which includes instructions on how to send
commands and responses to/from devices.
UM2920
ETS5 setup through Tapko USB dongle
UM2920
-
Rev 1
page 53/71
