Step 4.
Use the binaries according to the topology shown below.
Figure 53.
Topology for the binary files
Tera Term (or Hyperterminal) window is necessary for both applications:
–
for KNX-RF push button application, to type commands (on/off, dimming, color);
–
for KNX-RF LED actuator, to simulate LED actuator by displaying received commands.
Step 5.
Set up the LED actuator as follows.
Figure 54.
LED actuator setup
Step 6.
Push the reset button (on LED actuator application) to reset information on Tera Term.
Figure 55.
LED actuator setup
UM2920
STM32L0 setup
UM2920
-
Rev 1
page 33/71
