ST STLINK-V3SET User Manual Download Page 34

Page: 34 / 40

B-STLINK-VOLT board extension description

UM2448

34/40

UM2448 Rev 4

12.2.2

Opened casing for access to all connectors (through MB1440 adapter
board)

Remove the USB cable from STLINK-V3SET.

2. Unscrew the casing bottom cover of the STLINK-V3SET or remove the adapter board

(MB1440).

3. Remove the JP1 jumper from the MB1441 board and place it to the JP1 header of the

MB1598 board.

4. Put the plastic edge in place in order to guide the B-STLINK-VOLT board connection to

the STLINK-V3SET base board (MB1441).

5. Connect the B-STLINK-VOLT board to the STLINK-V3SET base board (MB1441).
6. [optional] Screw the B-STLINK-VOLT board in order to ensure good and stable

contacts.

7. Plug the MB1440 adapter board to the B-STLINK-VOLT board in the same way it was

previously plugged to the STLINK-V3SET base board (MB1441).

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for STLINK-V3SET









































Search results

Summary of Contents for STLINK-V3SET

Reviews:

Related manuals for STLINK-V3SET

Brands by name

Popular brands

ST STLINK-V3SET, User Manual

Search results

Summary of Contents for STLINK-V3SET

Reviews:

Related manuals for STLINK-V3SET

Brands by name

Popular brands