B-STLINK-VOLT board extension description
UM2448
32/40
UM2448 Rev 4
12
B-STLINK-VOLT board extension description
12.1 Features
•
1.65V-3.3V voltage adapter board for STLINK-V3SET
•
Input/output level shifters for STM32 SWD/SWV/JTAG signals
•
Input/output level shifters for VCP Virtual COM port (UART) signals
•
Input/output level shifters for bridge (SPI/UART/I2C/CAN/GPIOs) signals
•
Closed casing when using STDC14 connector (STM32 SWD, SWV, and VCP)
•
Connection compatible with STLINK-V3SET adapter board (MB1440) for STM32 JTAG
and bridge
•
Operating temperature 0 to 50 °C
12.2 Connection
instructions
12.2.1
Closed casing for STM32 debug (STDC14 connector only)
1.
Remove the USB cable from STLINK-V3SET.
2. Unscrew the casing bottom cover of the STLINK-V3SET or remove the adapter board
(MB1440).
3. Remove the JP1 jumper from the MB1441 board and place it to the JP1 header of the
MB1598 board.
4. Put the plastic edge in place in order to guide the B-STLINK-VOLT board connection to
the STLINK-V3SET base board (MB1441).
5. Connect the B-STLINK-VOLT board to the STLINK-V3SET base board (MB1441).
6. Close the casing bottom cover.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from