ST STEVAL-IDZ301V1, User Manual

Page: 6 / 28

Kit parts UM1454
6/28 Doc ID 022085 Rev 2
1 Kit parts
As specified in Table 1 , several versions of the STEVAL-IDZ301V1 and STEVAL-IDZ302V1
are defined based on the SPZB32W1x2.x module type that is integrated.
The following abbreviations are used throughout this document.
The kit consists of the parts described in the following sections.
1.1 Hardware
Fully featured development board that targets the prototyping of network devices. External
connectors allow to integrate the peripherals as desired. The board can be supplied by
means of an ex5 V supply or through the integrated mini-USB connector.
STEVAL integrates the following:
●
An RF module belonging to the series of ZigBee/802.15.4 SPZB32W1x2.x modules
● A 20-pin JTAG connector for programming and debugging purposes
●
Hardware support for application development:
– Temperature sensor
– Voltage battery measure circuitry
– Two configurable pushbuttons
– Two configurable LEDs
● Mini-USB connector and USB-RS-232 bridge
●
A reset pushbutton
● A DC power source selection between the external power supply or external USB
supply
Table 1. The STEVAL-IDZ3xxV1 versions
Order codes Integrated module
STEVAL-IDZ301V1 SPZB32W1A2
STEVAL-IDZ302V1 SPZB32W1C2
Table 2. Abbreviations
Full name Abbreviation
STEVAL-IDZ3xxV1 The kit
STEVAL-IDZ3xxV1 HW STEVAL
STEVAL-IDZ3xxV1 SW IDZ3LIB
Radio communication module RCM
SPZB32W1xx RCM
STM32W108CB STM32W
www.BDTIC.com/ST