HW description
UM1454
18/28
Doc ID 022085 Rev 2
2.6
Getting started with the kit
2.6.1 Installing
the IDZ3LIB library
The protocol packages libraries defined for use of the STM32W micro with the STM32W-SW
kit can be also used with the STEVAL-IDZ3xxV1. Customized files and utilities are provided
in the IDZ3LIB to allow the use of a STEVAL board in place of the MB851/MB850 boards on
which the STM32W-SK kit is based. The content of the IDZ3LIB can be integrated into the
STM32W protocol packages as described below.
2.6.2 IDZ3LIB
content
Copy the file IDZ3LIB.zip contained in the CD in a folder of the PC and unzip it. In the
following the installation folder is indicated as $IDZ3PATH. The library contains:
pro/idz3lib which contains a customization of the sensor-sink application for version
4.0.2 and 4.3.0 of the EmberZNet protocol stack library
–
prebuilt contains binary files
–
sensor contains source files and an IAR project tailored to this application
HAL contains the hardware configuration files for STEVAL
documentation/idz3lib contains documents related to the kit and the SPZB32W1x2.x
series of modules
tools/idz3lib contains
–
flasher utility to be used with STEVAL for loading a bin file on the STM32W
–
CP2102 contains a driver and a configuration tool for use of the CP2102 USB
bridge device
–
batch files for installation of idz3lib in the package EmberZnet 4.0.2 or EmberZnet
4.3.0, as detailed in the following paragraphs.
2.6.3
Integration of IDZ3LIB in EmberZnet 4.0.2
Install the EmberZnet 4.0.2 package available from ST. The package is installed in
C:\Program Files\STMicroelectronics\EmberZnet-4.0.2
Run the batch file “set IDZ3LIB v402.bat” in $IDZ3PATH --> tools --> idz3lib.
The batch file integrates the files contained in IDZ3LIB in the structure of EmberZNet 4.0.2.
2.6.4
Integration of IDZ3LIB in EmberZnet 4.3.0 package library
Install the EmberZnet 4.3.0 package available from ST. The package is installed in
C:\Program Files\STMicroelectronics\EmberZnet-4.3.0
Run the batch file “set IDZ3LIB v430.bat” in $IDZ3PATH --> tools --> idz3lib.
The batch file integrates the files contained in IDZ3LIB in the structure of EmberZNet 4.3.0.
www.BDTIC.com/ST