ST SPC58XXADPT144S REV.B, User Manual

Page: 11 / 19

SPC58XXADPT144S REV.B Minimodule 11/19 rev1.0 October 27
3.6 Test Point
The minimodule has several test points. Below all test point description:
Test Point Description
GT1, GT2, GT3, GT4, GT5 GND test point
GT6 AGND test point
GT7 VSS_OSC test point
TP1 TCK test point
TP2 TMS/Txp test point
TP3 TDI/Txn test point
TP4 TDO/Rxp test point
TP5 JCOMP/Rxn test point
TP6 J23A, QSH connector, pin10 (PA5) test point
TP7 J23A, QSH connector, pin11 (PA6) test point
TP8 J23A, QSH connector, pin12 (PA7) test point
TP9 J23A, QSH connector, pin13 (PA8) test point
TP10 J23A, QSH connector, pin14 (PA9) test point
TP11 J23A, QSH connector, pin19 (PA14) test point
TP12 J23A, QSH connector, pin49 (PE4) test point
TP16 J23A, QSH connector, pin53 (PE8) test point
TP13 J24B, QSH connector, pin210 (PD6) test point
TP14 J24B, QSH connector, pin209 (PD7) test point
TP15 J24B, QSH connector, pin207 (PD9) test point
TP17 J24B, QSH connector, pin183 (PF13) test point
Table 6: TEST POINT
3.7 Connectors
The minimodule has the following connectors:
Connectors Description
J18 38-pin Mictor connector for Nexus level 3+
J14 14-pin header connector for JTAG port
CN1 10-pin header connector for JTAG/DigRF port
J12 Fault Collection and Control Unit (FCCU) pin, for failure notification
J23, J24
2 X SAMTEC QSH series, 240 way connector to connect minimodule
to Motherboard
J2 External power supplies input (5V, 3.3V, 1.25V)
J26 SMA Connector for External Clock Input
Table 7: CONNECTORS