SPC58XXADPT144S REV.B Minimodule
9/19
rev1.0 October 27
3.3 Reset Circuit
The minimodule supports different way to reset the microcontroller.
To use and perform the reset driving there are different jumper and switch:
Jumper
Description
Default
SW1
Reset push button
Open
J22
Connect the external reset to the reset driver
for ESR0 and PORST pins
Close
J20
Connect the external reset to ESR0 pin
Close
J25
Connect the external reset to PORST pin
Close
Table 3: RESET CONFIGURATION JUMPERS
3.4 Port Configuration
The following jumpers need to configure the ports:
Jumper
Description
Default
JP13
TESTMODE settings
Close
(10KΩ pull-down)
J13
RSTIN configuration
•
1-2: ESR0
•
2-3: PORST
2-3
(PORST)
JP2
JTAG/DigRF pin 9 configuration
•
1-2: EVTO
•
2-3: ESR0
1-2
(EVTO)
JP3
PIN26 configuration
•
1-2: PG1
•
2-3: EVTI(CHORUS 1M)
Closed 1-2
JP4
EVTI SWITCH configuration
•
1-2: to JP3(CHORUS 1M)
•
2-3: to JP5(CHORUS 6M)
Closed 1-2
JP5
PM5/EVTI configuration
•
1-2: PM5
•
2-3: EVTI(CHORUS 6M)
Closed 1-2
JP6
PIN27 configuration
•
1-2: PG2
•
2-3: EVTO(CHORUS 1M)
Closed 1-2
JP7
EVTO SWITCH configuration
•
1-2: to JP6(CHORUS 1M)
•
2-3: to JP8(CHORUS 6M)
Closed 1-2
JP8
PIN130 configuration
•
1-2: PM6
•
2-3: EVTO(CHORUS 6M)
Closed 1-2
Table 4: PORT CONFIGURATION JUMPERS
Summary of Contents for SPC58XXADPT144S REV.B
Page 19: ...ISO9001 ISO14001 Certified ...