Danger:
You must take care when changing the NVM parameters. Improper settings can lead to the offline
converter destruction.
Figure 27.
NVM editor window
9.5.1
NVM options
•
Read from IC: reads NVM content from chip
•
Write to IC: writes current NVM content to chip
•
Import NVM from disk: reads an NVM file (.INIT format) previously stored
•
Export NVM to disk: writes the current NVM on disk (.INIT format)
Note:
Writing NVM parameters is only possible in ATE mode.
9.5.2
How to change parameters
Procedure
Step 1.
Click on the parameter to edit.
To quickly access parameters, you can click on the relevant section (System, Fault, LLC, PFC, etc.) to
display a detailed description of the parameter.
Step 2.
Click on the
Combo
box to choose the value.
For each value, the internal firmware value is also shown.
Figure 28.
Parameter change
UM2342
NVM editor
UM2342
-
Rev 1
page 24/57
