Step 3.
In the [
SPI configurations
] section, click on the [
+
] button to add a row and configure the SPI port
selected in the previous step.
Figure 19.
SPI configuration list
Step 4.
Double-click on the row just added.
Step 5.
Add the name that you want to give to the configuration in the [
Symbolic Name
] field.
For example, type "configuration_name”. In addition, to set up the communication with the
L99DZ200G
device properly, set the parameters in the [
Transfer
] section as shown below.
Figure 20.
SPI transfer configuration
UM2995
How to configure the low-level drivers
UM2995
-
Rev 1
page 16/47
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
