EN - 15
14. ACCESSORIES ON REQUEST
14.1 ALTERNATIVE BATTERIES
Different capacity batteries are available to
suit specific operating requirements (Fig.
17
).
The list of approved batteries for this machine
can be found in the "Technical Data" table.
14.2 BATTERY CHARGER
Device used to recharge the battery
: fast
(Fig. 18.A), standard (Fig. 18.B).
PROBLEM
PROBABLE CAUSE
SOLUTION
5.
The machine gives off
smoke whilst working
Damaged blower.
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
6.
Battery power
reserve is low
Severe working conditions
requiring greater
current absorption
Optimise operations (para. 7.2.1)
Battery is insufficient for
operating requirements
Use a second battery or extended
battery (para. 14.1)
Decrease in battery capacity
Purchase a new battery
7.
The battery charger
is not recharging
the battery
Battery is not correctly inserted
in the battery charger
Check it is correctly inserted (pa
r. 7.2.3)
Unsuitable environmental conditions
Recharge the battery in places with
suitable temperatures (see battery/
battery charger instruction manual)
Dirty contacts
Clean the contacts
The battery charger is not energised
Check it is plugged in and the
power socket is energised
Faulty battery charger
Replace with an original spare part
If the problem persists, refer to the battery/
battery charger manual
8. The LED indicator
(Fig. 8.E) remains
ON in steady mode
Self-check failed
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
9. The LED indicator
(Fig. 8.E) remains ON
in flashing mode
Battery communication error
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
Rotor blocked
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
Current overload
Optimize machine usage.
PCB overheated
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
If problems persist after implementing the solution, contact your Dealer.
14.3 BATTERY BACKPACK
The device is used to place the two batteries
and provides the electrical power required
for the operation of the machine.
It is provided with a cable used for the
connection to the machine (Fig. 1.I) and with
a selector (Fig. 7.B) to select one of the two
batteries (position "1" and "2") and "OFF".
14.4 BATTERY SIMULATOR
Battery simulator:
device that, if
inserted in the machine housing, allows
the use of the battery backpack.
Summary of Contents for AB 500 Li 48
