4
Installation Details
Lay The Rubber Seal
Rubber sealing material has been provided to help seat the
edges of the cooktop neatly onto the benchwork.
The cooktop must not be bonded to the benchwork with
any adhesive or permanent sealant, as this will prevent
future servicing and maintenance work to be carried out.
Instal The Cooktop and Secure With Brackets
Remove all packing material and literature from the
cooktop.
Lower the cooktop into the cutout. Use the 4
brackets and screws supplied to secure the cooktop
into the cabinetry.
The brackets are designed to clamp the cooktop to
a bench with thickness between 20mm and 50mm.
If the benchtop is thicker than 50mm, cut a recess
into the underside of the benchtop to a thickness of
50mm or less.
Create Cutout In The Benchtop
The required cutout dimensions are as shown in the
diagramme, Ensure all cutouts are neat and square,
and as close to the nominal dimensions as possible. A
tolerance of /- 2mm is allowed for.
We recommend sealing the cut edges of the benchwork
with a moisture proof paint to prevent future deterioration
to the benchtop material.
MM
MM
Attach The Duplicate Data Label
Once the cooktop is in position, attach the duplicate data label to a
visible surface adjacent to the cooktop, so that appliance details can
readily be seen for future maintenance.
