IGW/100 – The IGW/100 in use
S S V
E MB E DD E D
S Y ST EM S
12
4.5 Ethernet
Link
The Ethernet link on port LAN 1 requires a patch cable that is 100Mbps compli-
ant, i.e. a CAT5 cable. For Ethernet links on ports LAN 2 and 3 the patch cable
must be 10Mbps compliant. Furthermore one hub or switch and an Ethernet LAN
adapter for your development system are needed.
The
figures 4-5 and 4-6
show the connections with port LAN 1. Connections to
the port LAN 2 and LAN 3 can be made equivalently.
Please refer to
chapter 4.7
for the LAN 2 and LAN 3 jumper settings.
Figure 4-5: Ethernet link on LAN 1 with hub or switch
If you want to connect your development system directly to the IGW/100 place a
crossover cable between these two systems as shown below.
Figure 4-6: Ethernet link on LAN 1 with crossover cable
