A. Remove the hood, remove the two T40 Torx bolts that secure
top center dash. From inside the vehicle, release the dash
by gently pulling toward the rear of the vehicle. Place center
dash to the left
C. Remove the ten T40 Torx bolts that secure the 2 piece fender.
Note: there is one screw inside the fender well. Remove the
two additional screws from the striker plate, slide fender up
the cage rail and secure
B. Remove the two T40 Torx bolts that secure the front dash.
Carefully release the panel clips along the perimeter of the
dash by pulling toward the rear of the vehicle, remove front
dash and set aside
D. Remove the two 10mm bolts the secure factory glove box and
remove the factory glove box
RZ3-GB10
A
C
B
D
SSV HOLE PATTERN
KICKER HOLE PATTERN
FOR UNLOADED ENCLOSURES:
Pink hole pattern: SSV Works Subwoofer
Blue hole pattern: Kicker Subwoofer
If using a different brand subwoofer, first see if the
subwoofer holes line up with either one of the pre-
drilled hole patterns. If not, make sure to drill new
holes away from the pre-drilled holes.
