E. Lift the enclosure into place and align the top channel in the grab handle
bar, while holding the enclosure in place, loosely attached the flat brackets
to the top of the enclosure using the long screws provided.
G. While applying pressure keeping the enclosure secure against
the front wall, tighten the top brackets, as they tighten they
will bend slightly to add pressure and avoid any vibration, now
tighten the lower L bracket to the enclosure
F. To properly align the box, slide the box firmly toward the front of the
vehicle. It should sit approximately 1/4” from the factory glove
box mount. If not properly installed, the dash of the vehicle will
not securely push back into position.
I. For 2015-up model year vehicles, install the supplied bracket using
the short screws provided and adjust forward or back so glove box
latch closes tight
H. Loosely install the bottom L bracket, align the mounting hole with
the factory bung and secure with one of the long screws provided
(you will tighten the bracket to the enclosure and factory bung
AFTER step J)
RZ3-GB10
F
E
F
G
E
I
H
J. For 2014 model year vehicles remove the factory glove box
door latch. Mount the latch to the supplied bracket and
secure to the enclosure using the short screws provided
J
