WWW.SSTCOMM.COM
25
Bytes
: Input bytes of "Response Data". In the above example, click on "Byte5-8" will show the information
“Primary Variable” in the left bottom area.
Memory Address
: Set the start address of these bytes in data buffer;
Starting address
: This parameter is automatically calculated and is the relevant Modbus register address of
"Memory Address";
Byte swap
: "No swap" and "Register swap" is optional, which is only valid to float type data. For example,
the original data is 0x12345678, it will be 0x56781234 when using "register swap".
Double-click on a variable to add or delete it. Add "Byte0-3" and "Byte5-8" as shown below:
