17
Programming using the PC and
bus programming software
(BPS 650-…)
Log into the Gateway usin
g one of
the possibl
e connections.
On fi
rst
registering at t
he Gateway, mes
-
sages appear about licensing agree-
ments and product registration:
• To be able to use the Gateway,
c
onfirm the licensing
agreement
with
OK
.
• Confirm the registration prompt
with
Register now,
if you have not
yet registered, and complete the
product reg
istration.
If registration is
not possible at the current time, click
on
Later.
Click on
Do not show
again
if you have already registered
the product.
Procedure:
1
Start your web browser
, enter
the IP addre
ss of the Gateway (e.g.
169.254.1.1 or 192.168.178.100)
and
confirm your entry.
2
The Login page of the Gateway is
open
ed.
The language of the login
page depends on the language
settings of your commissioning
laptop/PC.
3
If applicable, select a different
language.
4
Enter the user name admin if this
is not already entered
5
Enter the relevant password
(standard: admin).
6
Click on Log in.
7
Confirm the licence
conditions
with OK.
8
Confirm the registration promp
t
if you have already registered,
otherw
ise complete the product
registration.
Performing a system update
Every time before updating the
system (up
grade/downgrade), ca
rry
out a complete s
ystem backup.
Ensure that all system backups are
safely and
permanently stored.
During the update process, the
pow
er supply must not be inter-
rupted, as ot
herwise the Gateway
will be damaged.
During the
update, the
status LED flashes.
Important: After every system
update, the option “Persistently
store protocols” is deactivated to
enable the
flash memory for th
e
updating process.
This deletes
all sav
ed protocols. You sh
ould
therefore save all protocols to your
laptop/PC before every system
update.
The system update only affects the
Gateway and the connecte
d hard-
ware.
Any available BSHT must be
manually updated after the system
update.
Update via local update tool
Procedure:
1
To access the latest software
update,
please download the
update
tool from www.siedle.com/sg-650
2
Save the file with the extension
.exe to your hard drive.
3
Activate the installation process by
double-clickin
g and run the tool.
4
Confirm any pop-up queries about
whether you really wa
nt to run the
tool.
5
Select the network connectio
n via
which the Gateway can be reached.
6
On the Gateway’s user
interface,
activate System > Update > Use local
update URL
7
Copy the update URL sh
own in
the local update tool and paste it
into the Gateway u
ser interface in
the
following location:
System >
Update > Use local update URL
8
Click the Set update URL button
9
Click the Start update button
10
The current system version and
the update
version are shown.
11
Select whether a syst
em backup
is availab
le or not needed.
12
Click the Update system button.
During this update process, the
Gateway and then the
connected
hardware will be updated to t
he
latest software v
ersion – provided a
newer version than t
he one already
insta
lled is available.
Important
Do not close the tool until all update
processes for all devices have com-
pletely finished.
Update via server
If you have a continuous Internet
connection, you can also carry out
the update via the Siedle update
server.
Procedure:
1
On the Gateway’s user
interface
activate the option in the fol
lowing
location: System > Update > Use
Siedle update server
2
Click the Check for updates
button.
3
The current system version and the
update
version are shown.
4
Select whether a syst
em backup is
availab
le or not needed.
5
Click the Update system button.
During this update process, the
Gateway and then th
e connected
hardware will be updated to
the
latest software
version – provided a
newer version than
the one already
inst
alled is available.
Change user profile / p
assword
Procedure:
1
Click on User > User profile.
2
Change/Complete the input fields.
3
Confirm your input by
clicking on
Apply.
4
Click on User > Change password.
5
Enter the old password
(Standard:
admin).
6
Issue a new password which com
-
plies with the stipulations.
7
Click on Apply in order to change
the password.
Setting the date and time
For correct local time, and
winter/
summer time changeover, the rele-
vant time zone must
be set. In the
as-delivered status of th
e Gateway,
the follo
wing values are pre-
set:
• German time zone (UTC+01:00)
• Automatic summer time
switchover disabled
• Manual date and time input acti-
vated
Summary of Contents for Smart Gateway Professional
Page 1: ...SG 650 0 Commissioning instruction Smart Gateway Professional ...
Page 34: ...34 ...
Page 35: ...35 ...
