background image

4

HT 644-01

Survey of functions

Meaning of buttons

Using the key combination F and a number between 0 and 9, it is possible
to activate remote control functions 0 - 9.

Call inhibit on/off

The software version, the logic address and the assigned number are
displayed for around 2 secs.

Concierge function

Call rerouting

   

Single actuation with the receiver down indicates the callback number.
Double actuation with the receiver up creates a speech connection to
the user which initiated the announcement.

+

Using keys collective call + 0, a collective call is started.

Normal operation: Light switch
Programming mode: Quits the submenu or programming menu.

Normal operation: Door release button
Programming mode: Confirms an input (Enter)

Normal operation: Dial repeat
Programming mode: Scrolling forward through main menus, submenus and tables.

Normal operation: No function
Programming mode: Scrolling back through main menus, submenus and tables.

Volume settings

Call volume setting

Announcement volume setting

Meaning of the LEDs

L1

The LED flashes when emergency or alarm calls are waiting.

L2

The LED indicates an activated call inhibit status.

L3

The LED flashes when a call back request is stored.
The LED is permanently on as long as a door loudspeaker call is waiting.

L4

LED for multi purpose use, see programming instruction

 0

 9

 0

  

i

 F

Summary of Contents for HT 644-01











Reviews: