SSS Siedle DoorCom IP Multi DCIP 740 Series, Manual, Page: 5 / 32

5
• Reception of status messages from
the Siedle Multi bus
• Speech connection via PC
(headset) or optionally via the tel‑
ephone
Commissioning and program-
ming
After connection of the supply
voltage, the devices SIM 740‑... and
SIVS 610‑... can be programmed
with the aid of a PRI 602‑... via the
PC. (See Chapter Commissioning)
No programming is required for the
DCA 740‑01. For programming and
configuration of the TC system, see
the relevant product information
and programming instructions of the
manufacturer.
Mounting and installation
The DCIP 740‑... can be connected
at any optional point of the Siedle
Multi system bus. The devices are
intended for switch panel mounting.
These should preferably be mounted
directly one next to the other. The
maximum conductor length of the
device connection must not exceed
1 metre.
The SIM 740‑... is linked to the
SIVS 610‑... with 6 cores. Actuation
of the link between the SIVS 610‑...
and the IPVS 600‑... takes place via
the patch cable.
Performance features
• Transmission of door calls with/
without video via the Ethernet to
PC users
• Free combination of PC call sta‑
tions and Multi Siedle terminals
• Audio transmission also pos‑
sible via the telephone network
(DCA 740‑01)
• Full duplex calls between door call
station and Software Client
• Actuation of the door release and
light possible from the PC with a
mouse click
• Video: MPEG‑4 (ISO/
IEC 14496) Codec, Audio: G.711
(300Hz ‑ 3.4KHz)
• From 1 door up to 49 different PC
call users can be connected
• Selective connection to a door sta‑
tion (Audio and/or video)
• Parallel call possible to max. 10 PC
users
• With the TLC 640‑... in com‑
bination with code lock module
COM 611‑..., alphabetical input
module AEM 645‑0 or display call
module DRM 611‑... direct calls are
possible from PC users
When using the camera assignment
mode and programmed parallel call,
the number of maximum possible
call destinations is reduced to 45.
Monitor assignment mode
PRI 602-... USB