SSS Siedle DoorCom IP Multi DCIP 740 Series, Manual, Page: 25 / 32

25
• Selection of the required speech
connection, half duplex or full
duplex
• Input of the IP address of the
IPVS 600‑.. for which the con‑
figuration is applicable. This input is
required to ensure that the Software
Clients are able to locate the DCIP in
the network.
• In the Inputs menu, all the IWA
addresses are assigned. An IWA
address for each call button/user.
The addresses have 6 digits.
• In the
Inputs
menu, the previ‑
ously entered IWA addresses can be
assigned to the call buttons at inputs
E1‑E4 if these are used.
• Write the configuration to the
SIVS 600‑... with
Send configura -
tion
.
• In the menu File DCIP, generate
the SC file for later import into the
Software Client. (If required, users
can be deselected which do not
receive a call.)
Note: This step is intended to create
different configurations for different
Software Clients (e.g. one worksta‑
tion has access to doors for which
another workstation is not author‑
ized).
The configuration is saved as a file
with the suffix *.dcip.
Note
Assign an unambiguous description
to the *.dcip file (e.g. Secretarial.
dcip).