28
7 DoorCom DCA 740-01
8 DoorCom IP
Factory setting
IPVS 600-...
The DoorCom Analog DCA 740...
is used as an interface between
DoorCom IP and an analog tel
ephone connection of a telecommu
nication system.
It is possible to assign the maximum
number of possible users in a line to
the DCA 740... . The functionality
depends in the main on the capa
bility of the telephone system /on
the telephones connected to it.
Assignments and functionality
for calls via the DCA 740... are
saved in the SII 650... . This can
be programmed using BPS 650...
if the connection via DCA 740... is
selected.
The selection of users and control
and switching functions takes place
by means of DTMF dialling. The
telecommunications system and the
connected telephones must there
fore possess DTMF dialling capability.
Power supply
The DCA 740... is supplied directly
from the SIVS 610... . A separate
supply is consequently not required.
The power to the a/b public net
work interface is supplied from the
telecommunication system or the
a/b public network connection from
the exchange. It is not possible to
connect an individual public network
telephone directly to the a/b line of
the DCA 740.
With the reset button at the
IPVS 600-..., it can be reset to the
asdelivered status. It is essential to
load the Siedle factory configuration
in the IPVS 600-... after a reset.
Proceed as follows.
1
Start the Internet Explorer on the
PC and enter the following in the
address line:
http://192.168.0.1
The IP settings in the asdelivered
status of the IPVS 610-...
User name: Service
Password: None issued on
delivery
The user interface is opened.
2
Select the
Expert mode
menu
item
3
Under
Expert mode
select the
menu point
Maintenance
.
4
Under Configuration select
"Search“ to find the configuration
file and select.
The file is on the supplied CD.
5
Select the file rtc_image.
6
Start the update with "Upload".
Summary of Contents for DCIP 650-01
Page 1: ...DCIP 650 01 Manual DoorCom IP In Home ...
Page 31: ...31 ...
