Spark Plug and Replacement
Spark plug specification: B8RTC
1.) Remove the spark plug cap, remove the spark plug with the wrench in the tool kit. Clean
any carbon deposits and dirt from the spark plug with a steel wire brush.
2.) Check whether the electrode of spark plug is damaged or not and the side electrode is
eroded.
Replace the spark plug if required.
3.) Check the spark plug electrode gap with a thickness gauge and adjust it to (0.6-0.7)mm.
Check the gasket seal of the spark plug is ok or not.
4.) When installing the spark plug, in order to prevent cross threading, screw in the spark
plug by hand and then tighten it with the wrench.
0.6~0.7mm
Summary of Contents for RAZKULL 125
Page 1: ...RAZKULL 125 OWNER S MANUAL...
Page 11: ...1 2 3 1 Rear Right Footrest 2 Front Right Footrest 3 Rear Brake Pedal...
Page 33: ......
Page 37: ...ELECTRICAL DIAGRAM...
