SSR RAZKULL 125, Owner'S Manual

Page: 20 / 38

Driving the Motorcycle:
1.) Turn on the ignition switch, pull in the clutch lever firmly and start the motorcycle (if the engine is cold, use the choke lever)
2.) Accelerate the engine gradually and release the clutch lever slowly, match these two operations to ensure stable starting.
3.) Control your driving speed by using the throttle.
4.) After the motorcycle is driving steady, decelerate the engine speed, pull in the clutch lever firmly and step down on the shift
pedal into 2nd gear. Shift into the other gears using the same method.
5.) When you need to stop the motorcycle, please release the accelerator and reduce your driving speed gradually with the brake
pedal and brake lever.
Note:
Only shift gears when the clutch is disengaged and the throttle is decreased otherwise the engine, drive chain and other parts
could be damaged. Operate the front and rear brakes in unison, do not brake violently to lower the braking effectiveness, and the
controls of the motorcycle would become difficult.