1. Remove the chassis from Slide Bracket Housing
;
1
)
Press the REL button to release the control panel ;
2
)
Hold the right side of the control panel to pull it rightwards a little and then to
you for removing it ;
3) Remove the PLASTIC FRAME from the chassis (see the Installation diagram);
4) Insert the 2 KEY PLATES into the grooves at the both sides of the chassis till
they click(see the Installation diagram);
5) Pulling the two KEY PLATES to remove the chassis from the Slide Bracket
Housing ;
2. Mount the Sliding Bracket Housing in the position of car multi-media system and
bend some tabs of Sliding Bracket Housing to fix it.
3.
Connecting all wires:
1) Connecting all wires according ot the wiring diagram on next page;
REL
button
1
2
Installation
