AMMUNITION
Standard Factory Loaded Cartridges
The SSK-50 design provides for the use of interchangeable barrels which are chambered for a variety of factory
loaded cartridges. The proper cartridge for each barrel is clearly marked by its standard industry designation on
the top left side of each barrel. Barrels chambered for standard cartridges should be used with high quality com-
mercially manufactured ammunition with packaging and head stamp designation that corresponds exactly to the
barrel marking. If you have any questions concerning the proper ammunition of your SSK-50 Receiver, contact
SSK Firearms.
Custom/Wildcat Cartridges
Many SSK-50 barrels are available from several manufactures in custom cartridge chambers for those qualified
people who are totally experienced in reloading procedures. The novice should not attempt to use these car-
tridges until he or she has developed the required background and knowledge. Handload custom ammunition
only in accordance with the standards and guidelines set by component and reloading tool manufacturers. These
companies publish reloading manuals which must be read, understood, and adhered to. Use only that data
which is published by a reliable source and thoroughly tested by the component or tool manufacturer. Never
exceed the loads listed for a particular powder, bullet and case combination and never substitute components for
those listed. When using listed data, bear in mind that production changes affecting ballistic performance can
occur at any time and without our knowledge. If there is ever a question as to the correctness of a component,
write to its manufacturer. Failure to follow proper procedure can result in serious injury and/or death to yourself
or others. If you are unable to obtain reliable information with respect to procedure or standards for reloading,
contact SSK Firearms.
Page 9
