SSE AIRTRICITY User Manual Download Page 6

10

11

6

Set the electricity price

Low Price

START

Normal Price

START

Low Price

START

Normal Price

START

Standard (or Day) rate:

  Press the 

U

 button for 

3 seconds then let go.

  Press the 

U

 or 

V

buttons to select 

 

then press OK.

  The Normal Price 

display will appear and 

flash. Use the 

U

 and 

V

 buttons to set the 

price per kWh. You can 

find your electricity price 
on your bill under  

‘Rate’, or online at  

airtricity.com

  Press OK and price 

will be saved and the 

display will go back  

to normal.

If you have a Day/Night 
(Nightsaver) meter,  
go on to the next step to  
set your night rate.

Low Price

START

Normal Price

START

Low Price

START

Normal Price

START

Night rate (optional): 

  Press the 

U

 and 

V

      

buttons together for 3 
seconds then let go.

  The Low Price display 

will appear and flash.  
Use the 

U

 and 

V

      

buttons to set the price 
per kWh.

  Press OK and Low Price 

START time display will 

flash. Use the 

U

 and 

V

       

buttons to set the time 

your night rate starts. 

(11pm in winter or 12am 

in summer)

  Press OK and the 

Normal Price START 

time display will flash. 

Use the 

U

 and 

V

 

buttons to set the time 

your day rate starts. 

(8am in winter or 9am  

in summer)

  Press OK and the price 

and Day and Night rate 

times will be saved.

That’s it! You’re now  
all set up.

Summary of Contents for AIRTRICITY












Reviews: