2
3
Before you get started
The Airtricity Smart Energy
Monitor does not require you to
carry out any electrical wiring.
However, the transmitter has to
be installed at the meter near
the electrical supply to
your property.
If you have any doubt about
how to install it safely do not
attempt to install it yourself,
but consult a qualified
electrician.
Similarly, if you notice anything
unusual about your electricity
supply, such as loose wires,
exposed cabling, burn marks or
holes in the insulating materials
or damage to your meter then
STOP
immediately and consult
a qualified electrician.
Do not attempt to repair or
service any part of the Airtricity
Smart Energy Monitor. Contact
our Customer Service team if
you need assistance.
Do not immerse the product
in water, or any other liquids.
Do not expose the product to
heat, flame, steamy conditions
or extreme cold. Do not open
the equipment or touch any
of its electronic circuitry.
Do not hit, strike or drop the
equipment. If the display gets
broken take special care not to
touch the liquid crystals.
Do not use this product for
any purpose other than for
which it was intended.
Now you’re in control!
We’re delighted you’ve
made the decision to start
reducing your energy use
and your electricity bill by
signing up for an Airtricity
Smart Energy Monitor.
This guide will help you get
set up (it really only takes
a couple of minutes) and
give you a few tips on how
to use your new monitor.
Enjoy your savings!
What’s inside?