P52110_MXXXXX_Jan2020
PAGE 5
10
Insert pivot rod into shut-off plate as shown below.
TURN TO LOCK IN PLACE.
11
12
Insert other end of pivot rod into pivot and bracket assembly
as shown as shown above.
TURN TO LOCK IN PLACE.
14
Install flattened end of CONTROL
ROD in to LEVER on GAUGE as
shown. Turn to lock in place.
Next push LEVER forward to
setting “0”. Align CONTROL ROD
with hole in PIVOT BRACKET, pull
LEVER backward to insert CON-
TROL ROD through hole in PIVOT
BRACKET.
Now install 1/4-20 regular nut on
to CONTROL ROD.
Install HANDLE SHAFT to LOWER
HANDLEs and PIVOT & BRACKET
assembly as shown. Using 2” bolts
and locknuts.
TIGHTEN BOLTS & NUTS NOW.
ASSEMBLY
13
Install (1) 1/4-20 Hex nut (not a locknut)
on to control rod as shown.
Shut-Off
Plate
Pivot Rod
with extra bend
Rotate
Pivot
Angle
Attaching
Arm
Pivot
Rod
Insert Pivot Rod
into Shut-Off
and rotate to secure
Control Rod
Tabbed Hole
Control Rod
Lever
Tension Nut
Gauge & Lever
30
¼
-20
Hex Nuts
Pivot
Bracket
Control
Rod
Pivot
Rod
