P52110_MXXXXX_Jan2020
PAGE 3
ASSEMBLY
5
4
Install gearbox by inserting the pinion shaft into hole
in center of hoppers bottom. The word “FRONT” on
the gearbox must point to Front of the hopper.
The EarthWay logo is on the front of the hopper.
A - Install LOWER HANDLES onto FRAME to both sides as shown. Insert 2¼” bolt through hole in LOWER HANDLE
and through hole in FRAME install locknut.
DO NOT TIGHTEN
.
B - Now insert 1½” bolt into the hole in LOWER HANDLE,
then through FRAME brace. Next into threaded connector
in CROSS BRACE.
NOTE
: Numbers on frame brace must be facing toward
gear box as shown. Next into threaded connector in cross brace.
DO NOT TIGHTEN
.
Install the FOOT into the FRAME and align the bolt holes in the
FOOT and the FRAME (a Phillips screwdriver or large nail is helpful
to align the parts)
C - Next insert 1½” bolt through other end of FRAME BRACE and
through hole in FRAME through the FOOT and install locknut.
Gearbox Assembly
Frame
Brace
Impeller
Cross Brace
Frame
Lower Handle
Shut-Off
1/4-20 x 1-1/2”
Hex Head Bolt
STEP 5B
STEP 5C
1/4-20 x 2-1/4”
Hex Head Bolt
STEP 5A
Foot
Gearbox
FRONT
FR
ON
T
