8
Radio
Tuning in a station
Note
During, reception of stereo station the “ST” indication is on.
When tuning in stations while driving, use preset number button to prevent
accidents.
Turn on the radio
1.
Press RADIO/AST button repeatedly to select the band.
FM1
FM2
AM
FM1
Storing a station manually
You can preset six stations for each band (FM1, FM2 and AM).
1.
Following steps 1 tot 4 in “Tuning in a station” to tune to the frequency you wish
to preset.
Tuning a station manually
2.
Press and hold the Number [1 INTRO] ~ [6 INFO] buttons
for more than two seconds to select the preset number.
The frequency is stored in the selected preset number and
you will hear a beep.
To preset another station, repeat these steps.
3.
Rotate TUNE dial or press << SEEK >> buttons repeatedly
to tune to a desired frequency.
Note
If you try to store another station using the same preset number, the previously
stored station will be replaced.
Tuning a station automatically
4.
Press << SEEK >> buttons for more than two seconds,
then release.
Seeking will start.
The tuning automatically stops at the stations whose signals
can be received, and the station is selected.
To quickly scan a station
5.
Press SCAN button to start tuning for a station.
The unit will go to a station, play five seconds, and then go
to the next station.
When the unit tunes in to the desired station, press
SCAN button to stop scanning
Summary of Contents for SYMC X100 EA HU S014
Page 17: ...17 ...