Installation and configuration
Page 27
Figure 10 VHF Antenna connection
3.4 Connecting the equipment
3.4.1
Data connections
The accessory cable provides a simple method of implementing a typical
Class B installation with minimum difficulty. If the planned installation is more
complex it is recommended to use the optional fully wired cables and Junction
box for greater flexibility
An accessory cable is supplied with the product to provide connections to the
NMEA0183 bi-directional data ports. The cable has a pre-moulded connector
at one end which should be connected to the 18-way connector on the rear of
the unit.
The other end of the cable has colour coded wires ready for connection The
table in Table 1 lists the function of each colour coded wire for reference.
VHF antenna
connection
Summary of Contents for 427-0002B
