SRS Lighting DXD-8NI, Instruction Manual

Page: 7 / 24

( 7 / 24)
1. Merger mode
This submenu allows you to set the desired merger mode.
There are several modes of merging. One of the following modes can be chosen:
•
HTP A-B Higher takes presence.
•
LTP A-B Last takes presence.
•
BKP B>A Backup by DMX B in case of signal loss on DMX A.
•
BKP A>B Backup by DMX A in case of signal loss on DMX B.
•
DMX PRS DMX preset function /More info below/.
•
DMX SFX DMX safety function /More info in the SFX setup/.
For all merger modes except of the Preset /PRS/ one, the following diagram is valid:
DMX PRS
/DMX preset/ is a function that allows its user to save and call scenes directly from
a console using channels 1 to 16. The console is connected to the DXD device using the DMX
INPUT B. Faders on channels 1 to 16 respectively, serve as controllers of the preset output
intensity. Activating channel 17, the DXD unit ignores the DMX A input. Channel 18 is used to
save the individual presets.
The DMX preset can also be controlled using an additional equipment of the DXD device. In
this case, the presets are called using a single press of a corresponding button. They are
saved when the button is held for more than 5 seconds.
The following screen with the corresponding Preset number appears after the preset is saved:
and the device shows their values in the home screen.
The following diagram is valid for the PRS Preset mode: