SRS Lighting DXD-8NI, Instruction Manual

Page: 17 / 24

( 17 / 24)
5. Buttons
DXD-8NI device features the network interface that serves as a platform for additional buttons.
BT on the NI.
This submenu allows you to set the buttons.
Press “ENTER” to enter the
Logic
. Scroll the Encoder to choose between
NO
(Normally Open)
and
NC
(Normally Closed) and confirm by “ENTER”.
Scroll down to
Function
to choose between
FLASH
and
LATCH
.
FLASH
allows you to activate one button at a time. By activating another button, the
previous button is deactivated. To deactivate all buttons, activate the
Transparent scene
button.
LATCH allows you to activate as many buttons as you wish by pressing them. Press each
button again to deactivate it and so on.
Confirm by “ENTER”.
Scroll down to the
Mix mode
to choose between
LTP
and
HTP
mode in case both button and
fader are active. Confirm by “ENTER”.
Scroll down to the
Transparent scene
to choose value between
0
and
15
. This is the button
number that is used to deactivate all scenes. Confirm by “ENTER”.
Scroll down to “OK” and press “ENTER” to save the settings.
6. Factory reset
This submenu allows you to reset the unit to the factory defaults.
THIS OPTION WILL DELETE ALL YOUR SETTINGS AND SAVED SCENES!!!
Scroll the Encoder to
YES
and confirm by “ENTER”.