( 3 / 8)
DMX input and output connections
Male and female DMX standard 3- or 5-pin XLR connectors are located on the
front panel. DMX input is optically isolated.
Device description
Front panel:
1.
DMX input
2.
DMX output
3.
Switch DMX start address (UP = ON)
#1-9 are allocated for DMX start address selection 1-256
#10 is TEST mode activation. In this mode, the outputs runs
in sequence 1-16 automatically 0/+10V.
4.
LED indication
POWER ON
ON when device is powered
DMX OK
ON when correct DMX is received
DMX OK
BLINKING when test DIP is activated
DMX ERR
ON when DMX with inversed polarity is
detected
Rear panel:
1.
SUB-D output connector
2.
Power supply
Summary of Contents for DTA16
Page 6: ... 6 8 ...
Page 7: ... 7 8 ...
