SRS Lighting DTA16, Instruction Manual

Page: 2 / 8

( 2 / 8)
General
IMPORTANT INSTRUCTIONS
All safety and operating instructions should be read before the equipment is
installed or operated.
IMPORTANT SAFETY INFORMATION
The following general safety precautions have to be observed during all phases
of operation, service, and the repair of this equipment. Failure to comply with
these precautions or with specific warnings in this manual violates safety
standards of design, manufacture, and the intended use of this equipment.
Do not operate in an explosive atmosphere!
Do not operate this equipment in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes
a definite safety hazard.
Water, moisture, heat and humidity
Do not operate this equipment near water or in areas with wet floors or in high
humidity atmosphere where condensation forms on the equipment. It should
never be placed near or over a heat register or other source of heated air and it
should not be installed or operated without proper ventilation.
Proper use
Use only original adapter.
Let the device adapt the environment for at least 10 minutes after unpacking.
Analogue output connection
Analogue outputs (standard 0/+10V) are in a form of SUB-D socket.