( 6 / 8)
W-DMX Transmitter / Splitter
The DST4W-PRO can be used in the Transmitter and DMX splitter mode at the
same time. The DMX signal from input/thru is sent out via Wireless DMX to all
other linked W-DMX devices.
Signal bargraph LEDs are blinking in a row to indicate that the module is in the
Transmitter mode.
W-DMX button has two functions:
Short press:
Linking of unlinked Receivers
Long press:
Unlinking from all linked Receivers
W-DMX LED signalization in Transmitter mode:
Transmitter without DMX
MODE LED is green and the W-DMX LED is red or green according to the status
of the DMX connected to the in/thru port.
To add an unlinked Receiver, press the W-DMX button for a second. The
unlinked Receiver will start blinking quickly.
After a successful pairing, the W-DMX buttons on both units will blink slowly
showing the same status of the DMX connected to the Transmitter.
Transmitter with DMX
DMX is connected to the Transmitter and is transmitting the W-DMX signal. W-
DMX LEDs on both Receiver and Transmitter light in green color.
Bargraph is active and shows the W-DMX signal strength and the DMX status
on the Receiver.
