( 5 / 8)
W-DMX Receiver / Splitter
You can use the DST4W-PRO as a Receiver with the Splitter output.
There is an automatic back-up of the W-DMX line using the cable connection. If
the W-DMX is linked to the transmitter and the signal quality is poor, the W-DMX
active LED goes off and the splitter will retransmit signal from cable in/thru port.
In normal state, when the W-DMX signal quality is good, the W-DMX active LED is
on.
The W-DMX button has only one function – logging off from the linked
transmitter.
W-DMX LED signalization in the Receiver mode:
Receiver Mode unlinked
MODE LED is green and the receiver W-DMX LED is red. The bargraph does not
show the signal strength.
Receiver Mode linked
MODE LED is green and the receiver W-DMX LED is red or green according to the
DMX connection on the Transmitter’s side. The bargraph shows the signal
strength.
