(6 /16)
Link of WMC remotes:
Up to two WMC remotes can be linked together to group the operation of STOP and GO buttons. To
link two WMC units, 5-pin miniXLR cable with custom wire connection is needed.
Never use 1:1 cable – remotes can be destroyed.
When WMC remotes are linked, the GO and STOP buttons are linked – so press of any STOP and GO
button will work for both linked devices.
Link of Base WLV units:
Up to 30 Base units can be linked via link connector located on the front panel.
To link two WMC units, 5-pin DMX data cable is needed.
Due to safety requirements, the link function works only in LOCAL / LINK MODE
of the controller.
