Front panel:
Rear panel:
Device use:
By default, Power LED indicates that DSR8W is on main power. When the power light is
off, check the main power input. DSR8W can be used as usual DMX splitter, W-DMX
receiver or splitter with 8 outputs.
W-DMX signal does not affect the IN/THRU outputs. Cable connection can always be used
as a backup line for the W-DMX data line.
Transmitter / Receiver switch:
One of the two functions (Transmitter/Receiver) of
DSR8W PRO can be selected by holding the W-DMX
button
until
all lines of bargraph start blinking.
Switching between cycles OFF/TX/RX/OFF is possible
by turning the module on and off and by holding of
the W-DMX button.
