DMX operation
For the DMX operation, turn off the W-DMX module by holding the MODE button until both
W-DMX and mode buttons are lit in red color. W-DMX module is now turned off. Now just
connect the DMX cable to DMX IN connector and use DSR8W as standard DMX isolated
splitter one to eight. When the DMX signal is connected, LEDs marked as D+ and D- go on
for the input module and output modules 1:8.
W-DMX operation: Receiver
For the W-DMX operation, turn on the W-DMX module by holding the MODE button until
Mode lights in green. The W-DMX function button will indicate the W-DMX functionality
described on the next page. When the unit is in the Receiver mode, the signal bargraph is
showing the W-DMX signal strength. There is an automatic backup of the W-DMX line by
the cable connection. When the W-DMX is linked to the transmitter, signal quality is good
and the W-DMX active LED is on. When this LED is off, the quality of W-DMX signal is poor
or the Transmitter is turned off. Please check before reconnecting to transmitter.
W-DMX button LED signalization
W-DMX button RX function
•
Long press
/more than 10s/ – Unlinking from the Transmitter
