Solar Hybrid Inverter V1.0
13
L: Live Wire N: Neutral Wire : Ground Wire
③ Connect the AC output line properly according to the cable sequence and terminal position shown in the above
figure. Please connect the ground wire first, then the live wire and the neutral wire.
Wiring Method of PV Input:
①
Prior to wiring, disconnect the external circuit breaker and confirm whether the cable used is thick enough.
Please refer to Chapter "2.2 Wiring Specification and Circuit Breaker Selection";
②
According to the cable sequence and terminal position shown in the following figure, connect the PV input line
properly.
BAT Wiring Method:
①
Prior to wiring, disconnect the external circuit breaker and confirm whether the cable used is thick enough.
Please refer to Chapter "2.2 Wiring Specification and Circuit Breaker Selection". BAT wire shall be connected
with the machine through O-terminal. It is recommended to use O-terminal with inner diameter of 7MM. The
O-terminal must firmly compress BAT wire to prevent excessive heating caused by excessive contact impedance;
②
According to the cable sequence and terminal position shown in the following figure, connect the BAT wire
properly.
