11
Step 5:
Choose the
correct crank
length
of your crankset.
Step 6:
Zero Load Calibration
I
NOTE
Ensure there is no load on the pedal
while performing the offset calibration!
Continue with next step when
successful.
Repeat this step if calibration fails!
Step 7:
Angle Calibration
NOTE
Make sure the
right crank
is facing
directly
down
(at
90 degrees to the ground as
in the graphic on screen).
and the bike is on a level
(horizontal) and flat surface
when performing this
calibration step.
Step 8:
If the angle calibration is successful
you are all set and ready to go for a
ride!
If angle calibration fails repeat this
step until completion! Make sure the
crank doesn’t move while performing
the angle calibration.
Summary of Contents for X-Power
Page 1: ...EN V1 1...
