7
PEDAL INSTALLATION
Apply grease to the pedal threads.
Use a
15 mm
open end wrench (width
>6 mm) to install the pedals into your
crankset. Recommended min. torque
30Nm (22 lbf-ft)
. The pedal sides are
clearly marked with R and L.
I
NOTE
Do not use a cone wrench as it might
damage the charging port.
Right pedal
- right hand thread
Left pedal
- left hand thread
I
NOTE
Pedal clearance to the chain and
frame should be greater than two
millimetres.
>2 mm
Summary of Contents for X-Power
Page 1: ...EN V1 1...
