SRM PowerControl 7, Short Manual

Page: 24 / 28

Plug in the PowerControl with the Mini USB cable. Once the PC7 is
attached and recognized, the drop-down box with PC7 will grey out.
Enter your name or initials, interval of storage (seconds). Make sure
the ”automatic” box is checked, so the PowerControl will pick up
preprogrammed slope from the PowerMeter automatically. To
manually enter the slope, uncheck the ”automatic” box. Enter
circumference of tire (2095mm is the default). To make your speed
and distance accurate, do a roll-out and enter this number in
millimeters. Clicking the ”Special” button, will allow you to customize
your top line display, turn on or off Training Zones and change units
from metric to English.
To setup your PowerControl press the Setup
Button.
- Page 24 -
To download your training press
the download button.