SETTING THE ZErO OFFSET
It is important to use the SRM Training System with a correct zero
offset, if not the measured power
may be wrong. The zero offset can
be set manually or automatically
(by default). Turn the crank forward
to switch on the PowerMeter. Make
sure there is no force on the crank.
Press
MOdE
and
SET
at the same
time to enter the zero offset mode.
The screen shows the real-time zero offset value on the middle line.
The bottom line shows the previously stored zero offset. After the top
number stabilizes, press
SET
to store the new zero offset. If it remains
zero, the PowerControl is not receiving any signal from the Power-
Meter. Make sure the PowerMeter is turned on and paired correctly.
SETTING THE ALTITUdE
Pressing
MOdE
once more shows
the altitude menu where the abso-
lute altitude can be set using
PrO
(+) and
SET
(-). Pressing
MOdE
again returns to the main screen.
You can select metric or English
units using the SRM Software for
both Altitude and Speed.
- Page 19 -
Summary of Contents for PowerControl 7
Page 1: ...Training System www SRM de PowerMeter 7 PowerControl 7 Short Manual...
Page 4: ......
Page 6: ......
Page 27: ......
