The third screen shows the setup
menu for the wheel circumference
in millimeters [mm]. Press
PrO
to
increase or
SET
to decrease the
value of the flashing digit. Press
MOdE
to select each of the next
3 digits, then proceed to the next
screen. The fourth screen shows
the setup menu for data storage
interval. The storage interval can
be set between 0.5 and 5.0 sec.
By increasing
(PrO)
or decreasing
(SET)
the storage interval, the
available memory shown on the
bottom line changes from 65 to
655 hours.
The fifth screen sets the variable
to be used for training zones:
heart rate [bpm] or power [watts].
The sixth to tenth screens define
the limits for each training zone.
Hold
MENU
for more than three
seconds to return to the main
menu.
- Page 22 -
Summary of Contents for PowerControl 7
Page 1: ...Training System www SRM de PowerMeter 7 PowerControl 7 Short Manual...
Page 4: ......
Page 6: ......
Page 27: ......
