Update: 2019.SEPT Page 5 of 6
Maintenance
Adding Oil
Attention:
Keep the tool upright during all operations.
Connect the air supply, do not press the trigger.
There might be insufficient oil if you are not able to set the rivet in one hit. Without
proper lubrication the tool will not work properly and parts will wear prematurely.
1. Unscrew the oil fill screw from the body using the hex key supplied with the
tool.(Fig.5)
2. Fill the syringe (supplied with the tool) with hydraulic oil. Screw the filled syringe
in the oil fill screw hole. Inject all of the oil in the syringe into the tool, adequate oil
has been added if there is oil flowing back to the syringe when you loosen your hand,
then keep pressing the syringe for two or three times, in order to prevent air go into
the oil in the tool. (Fig.6)
3. Unscrew and remove the syringe from the body, then screw the oil fill screw into
the hole using the hex key, wipe off any excess oil.
Fig.5
Fig.6
