Copyright By SRC
Design and Specification are subjected to change
Page 3
Step 1:
Remove the 2 off Original Screw, as
shown in the drawing, one on top
side and other one on the bottom
side, from its mounting point, and
keep them aside. The same
Hexagonal Head Bolts will be
required to mount the Radiator
Guard, which will be explained in
subsequent steps.
Mounting Instructions
Step 2:
Orient and Align the Radiator Guard,
as shown, and Slip-in the Original
Screw – 2 off, and through the
mounting holes in the flap of the
Radiator Guard, in-line with the
mounting points (shown in red color).
Step 3:
Secure the threads in the mounting
point Ensure Orientation symmetry of
the Radiator Guard and visually check
for no fouling points below its surface
or on the sides and tighten it fully as
per OE Torque specifications ( 22 – 24
N-m)
