Copyright By SRC
Design and Specification are subjected to change
Page 4
2
2
2
2
STEP 3:
Orient and align the Bottom Plat (10) in-line
with the Panel mounting holes, and bring the
panels exactly in-line with them, and slip-in
the Mounting The Screw M8x40 (9) 2 off and
Bush M8 18x18 (7) 2 off, and The Screw
M8x85 (5) 1 off and Bush M8 18x50 (11) 2 off,
The Washer M8 (6) 3 off on each side and
secure the threads.
STEP 4:
Slip in the Top Rack (1) and slip-in the Taper
Ring M6 (2) 4 off , and Screw M6 x 25 (3) 4 off,
and Bush M8 15x10 (8) 4 off through the
Mounting holes in the Top Rack and, tighten it
to the torque .
Rear Rack as shown “Final Assembled condition”
