SRAM RockShox Super Deluxe Flight Attendant, User Manual, Page: 28 / 41

28
Flight Attendant functions can be selected with the Flight Attendant Control Module Menu button. Functions include Settings and Modes.
Modes actuate and adjust suspension position in
Auto , Manual , Override , or Safe Mode .
Settings are used to select Low Speed Compression (LSC) damper settings, and select suspension Auto Mode Bias Adjustment level.
Modes and Settings
Suspension Position is the electronically activated suspension setting (OPEN, PEDAL, or LOCK) while in Auto , Manual , Override , or Safe Mode .
Suspension Position is automatically adjusted in Auto Mode based on selected Bias Adjustment , and can be selected manually when in
Manual Mode with the AXS Controller or Control Module. One pre-selected Override Suspension Position can be activated when in Auto
Mode with the AXS Controller which instantly overrides Auto Mode.
Front and rear suspension can be in separate suspension positions while riding in Auto mode. Two green LEDs will illuminate when different
suspension positions are active for front and rear suspension.
Suspension Position
Auto Mode
Auto Mode is the primary mode of operation.
Green LEDs indicate that the system is in
Auto Mode.
While in Auto Mode, Flight Attendant reads
rider inputs and trail conditions to instantly
adjust suspension positions. The front and
rear suspension will automatically move
between OPEN, PEDAL, and LOCK positions
while riding.
The Control Module LEDs indicate the
activated suspension positions.
Suspension position adjustments are made
while riding based on the selected Bias
Adjustment level (more OPEN or more LOCK
actuation).
Auto Mode is the default mode when Flight
Attendant is 'awake', or on.
To activate Auto Mode from any other Mode,
press and hold the Menu button until one
LED pulses green.
Flight Attendant will monitor and adjust the
front and rear suspension automatically
while riding.
Suspension position adjustments are made
based on the selected Bias Adjustment level
(more OPEN or more LOCK actuation).
Adjust the Bias level at any time as needed
to achieve the desired Auto Mode ride
characteristics.
Use Auto Mode to maximize pedaling
efficiency and to allow the system to adjust
the suspension automatically.
Press & hold